Overview
The K series programmable digital display meter adds the following functions and features to the X series digital electrical measuring meter:
1. The display magnification, communication address, baud rate, etc. can be freely set through the buttons on the panel, making it very flexible and convenient to use
2. All can be equipped with one analog output, and the measured transmission output can be selected. The output can be 4~20mA, 0~5V, 0~12~20mA, etc
3. Optional relay alarm output for monitoring the upper and lower limits of the measured parameters
4. It can be equipped with RS-485 digital interface and adopts standard MODBUS-RTU protocol
5. Wide applicability and strong combination function
6. Digital zero and digital calibration, high accuracy, and extremely high cost-effectiveness
Technical indicators

42 square programmable digital display instrument model, function list

96 square programmable digital display instrument model, function table list

80 square programmable digital display instrument model, function table list

72 square programmable digital display instrument model, function table list

Ordering Example
When placing an order, please specify in detail the required model, input signal ratio, output requirements, and related information such as extended function modules
Example 1: Model: SSD194U-2K4
Input: 10kV/100V
Power network: three-phase three wire
Communication: RS485/MODBUS-RTU
Working power supply: AC220V